Removal & Installation (F150 Pickup)
WARNING: This page is about a different car, the 2002 Lincoln Blackwood and 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle hood. Disconnect battery ground cable. Remove headlight assembly retainers by pushing rearward and lifting up. Pull headlight forward slightly to expose harness connectors. Disconnect harness connectors and remove headlight assembly.
- Rotate headlight bulb retainer counterclockwise. Remove headlight bulb by pulling straight out with a gentle up-and-down motion. To install, reverse removal procedure. Ensure correct headlight adjustment after installation.