LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1267 (Accessory Drive) >> Removal And Installation >> Accessory Drive Belt Idler Pulley - 3.9L

Accessory Drive Belt Idler Pulley - 3.9L

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the accessory drive belt. For additional information, refer to ACCESSORY DRIVE BELT - 3.9L  in this article .
  2. Remove the bolt and the accessory drive belt idler pulley.
    • To install, tighten to 40 Nm (30 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals