LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1254 (Hydraulic Brake Actuation) >> Removal And Installation >> Brake Pedal Motor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column. For additional information, refer to STEERING COLUMN .
  2. Remove the 2 adjustable pedal motor screws and release the drive cable assemblies from the adjustable pedal motor.
  3. Disconnect the adjustable pedal motor electrical connector.
  4. Remove the adjustable pedal motor.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals