LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1252 (Rear Disc Brakes) >> Removal And Installation >> Rear Brake Caliper >> Installation

Rear Brake Caliper: Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the brake caliper and install the 2 bolts.
    • Tighten to 35 Nm (26 lb-ft).
  2. Using 2 new copper washers, position the front brake flexible hose and install the flow bolt.
    • Tighten to 47 Nm (35 lb-ft).
  3. Connect the parking brake cable and conduit to the brake caliper.
  4. Install the parking brake cable end to the parking brake lever arm.
  5. Bleed the caliper. For additional information, refer to BRAKE SYSTEM-GENERAL INFORMATION .
scientia non olet · About LEMON Manuals