LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Anti-Theft Systems - Passive - BLACKWOOD & F150 Pickup) >> Programming >> Key Programming Without Using 2 Programmed Keys

Key Programming Without Using 2 Programmed Keys

WARNING: This page is about a different car, the 2002 Lincoln Blackwood and 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This procedure is used when customer needs extra ignition keys programmed and 2 programmed ignition keys are not available but system has 2 ignition keys programmed. A maximum of 8 ignition keys can be programmed. If 8 ignition keys are already programmed, this procedure will not allow any more to be programmed. The number of programmed ignition keys can be determined by accessing PATS PID NUMKEYS with NGS tester.

Insert unprogrammed ignition key into ignition. Turn ignition switch to RUN position. Connect New Generation Star (NGS) tester to Data Link Connector (DLC). Insert Ford Service Function (FSF) card in NGS tester. Perform security access procedure. See SECURITY ACCESS PROCEDURE . Select IGNITION KEY CODE PROGRAM. Turn ignition switch to LOCK position. Disconnect NGS tester. Ignition key should now be programmed and able to start vehicle.

scientia non olet · About LEMON Manuals