LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1235 (Front Suspension) >> Removal And Installation >> Wheel Studs >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake disc and hub. For additional information, refer to DISC & DRUM article .
  2. Using a suitable press, remove the wheel stud from the brake disc and hub.
    Fig 1: Removing Wheel Stud From Brake Disc And Hub
    G04025766Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
    Fig 2: Installing Wheel Stud To Brake Disc And Hub
    G04025767Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals