LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1235 (Front Suspension) >> Removal And Installation >> Stabilizer Bar - E150-E450 >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel and tire assembly. For additional information, refer to WHEELS & TIRES article .
  2. Remove the four bolts and the stabilizer bar.
    Fig 1: Removing Stabilizer Bar
    G04025776Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.