NG Fuel Injectors

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2003 Mercury Sable, 2003 Mercury Mountaineer, 2003 Mercury Marauder, 2003 Mercury Grand Marquis, and 2003 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

The fuel injector is a solenoid-operated valve that meters fuel flow to the engine. The fuel injector is opened and closed every other crankshaft revolution. The amount of fuel is controlled by the length of time the fuel injector is held open.

The fuel injector is normally closed and is operated by 12 volt VPWR from the power relay. The ground signal is controlled by the PCM.

The fuel injectors are used to meter natural gas to each combustion cylinder. Although the natural gas fuel injectors appear very similar to some gasoline fuel injectors, they are unique. Flow capacity of these fuel injectors is 6 to 12 times as large as various gasoline fuel injectors. Electrical resistance is much lower than typical gasoline fuel injectors (4.6 ohms as opposed to 14.5 ohms). To accommodate this lower resistance, a fuel injector driver module is used to convert the PCM fuel injector driver signal to the signal required by the fuel injector.