LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1226 (Seat System) >> Removal And Installation >> Rear Seat Backrest - Second Row, 40 Percent E-Z Entry and Quad Bucket >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release all of the seat backrest J-clips. Slightly raise the backrest trim cover.
  2. Remove all of the staples in the backrest trim cover.
  3. Pull the seat backrest material up and remove the four backrest bolts. Remove the backrest assembly.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals