LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1226 (Seat System) >> Disassembly And Assembly >> Rear Seat Cushion - 40 Percent of 60/40 Bench, Second Row >> Disassembly and Assembly

Disassembly and Assembly

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the second row, 40 percent of 60/40 bench seat. For additional information, refer to REAR SEAT - 60/40 BENCH, SECOND ROW .
  2. Remove the second row, 40 percent of 60/40 bench seat backrest. For additional information, refer to REAR SEAT BACKREST - 40 PERCENT OF 60/40 BENCH, SECOND ROW .
    3. CAUTION: Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat cushion foam pad.
  3. Release the J-clips, separate the hook and loop fasteners and remove the seat cushion trim cover.
  4. Remove the cushion foam pad.
  5. Remove the cushion pad supports.
  6. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals