LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1223 (Antenna) >> Removal And Installation >> Antenna Lead-In Cable >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the audio unit. For additional information, refer to AUDIO UNIT .
  2. Lower the glove compartment door.
    3. NOTE: Release the pin-type retainers.
  3. Disconnect the antenna lead-in cable connection and remove the antenna lead-in cable.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals