LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Clutch System) >> Removal & Installation >> Clutch Slave Cylinder & Release Bearing >> Removal

Clutch Slave Cylinder & Release Bearing: Removal

WARNING: This page is about a different car, the 2002 Ford Ranger, 2002 Ford Explorer Sport Trac, 2002 Ford Explorer Sport, and 2002 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Remove the transmission. See TRANSMISSION . Inspect the clutch housing for traces of fluid. If brake fluid is visible, install a NEW clutch slave cylinder. Remove the clutch slave cylinder bolts and remove the clutch slave cylinder.

scientia non olet · About LEMON Manuals