LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1201 (Wiper System And Washer System) >> Diagnosis And Testing >> Wipers and Washers >> Component Test - Rear Window Wiper Motor >> Washer Pump Relay (Integral)

Washer Pump Relay (Integral)

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Test the rear window wiper motor internal washer relay function by measuring the voltage between wiper motor (4) component side pin 5 (7), and ground. When wash command input pin 6 (7) is grounded, measured voltage should read 10 volts or greater.