LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1191 (Interior Trim And Ornamentation) >> Removal And Installation >> A-Pillar Trim Panel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 assist handle bolt covers.
  2. Remove the 2 assist handle bolts.
    • To install, tighten to 10 Nm (89 lb-in).
  3. Remove the assist handle.
  4. Position the door opening weatherstrip aside.
  5. Remove the A-pillar trim panel.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals