LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1186 (Anti-Lock Brake System Control) >> Diagnosis And Testing >> Principles of Operation >> Pinpoint Test D: DTC C1095 - Anti-lock Brake System (ABS) Hydraulic Pump Motor Circuit Failure >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

The operating voltage required to run the hydraulic pump motor is in a range between 10 and 17 volts.

Voltage is supplied by circuit 534 (YE/LG) (hot at all times). Ground is provided through circuit 530 (LG/YE).

scientia non olet · About LEMON Manuals