Normal Operation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer, 2005 Ford Explorer, 2004 Mercury Mountaineer, and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Under normal operation the passenger rear window control switch receives power from the driver window control switch through circuit 170 (RD/LB). The passenger rear window control switch provides power to the power window motor through circuit 882 (BN/YE) and ground through circuit 881 (BN) to operate the passenger rear window down, and power through circuit 881 (BN) and ground through circuit 882 (BN/YE) to operate the passenger rear window up.

When operating the passenger rear window using the driver window control switch, power is sent to the passenger rear window control switch through circuit 320 (RD/BK) and ground through circuit 319 (YE/BK) to operate the passenger rear window down, and power through circuit 319 (YE/BK) and ground through circuit 320 (RD/BK) to operate the passenger rear window up.