LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1176 (Windows And Glass) >> Diagnosis And Testing >> Glass, Frames and Mechanisms >> Pinpoint Tests >> Pinpoint Test C: Single Power Window Is Inoperative - Passenger Front Window >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer, 2005 Ford Explorer, 2004 Mercury Mountaineer, and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Under normal operation the passenger front window control switch receives power from the driver window control switch through circuit 170 (RD/LB). The passenger front window control switch provides power to the power window motor through circuit 334 (RD/YE) and ground through circuit 333 (YE/RD) to operate the passenger front window down, and power through circuit 333 (YE/RD) and ground through circuit 334 (RD/YE) to operate the passenger front window up.

When operating the passenger front window using the driver window control switch, power is sent to the passenger front window control switch through circuit 314 (TN/LB) and ground through circuit 313 (WH/YE) to operate the passenger front window down, and power through circuit 313 (WH/YE) and ground through circuit 314 (TN/LB) to operate the passenger front window up.

scientia non olet · About LEMON Manuals