LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1154 (Engine -- 4.6L (2V)) >> In-Vehicle Repair >> Crankshaft Rear Seal >> Installation

Crankshaft Rear Seal: Installation

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tools, install the crankshaft rear oil seal.
    • Lubricate the crankshaft rear oil seal with engine oil before installation.
      Fig 1: Installing Crankshaft Rear Oil Seal
      G04583928Courtesy of FORD MOTOR CO.
  2. Using the special tools, install the crankshaft rear oil slinger.
    Fig 2: Installing Crankshaft Rear Oil Slinger
    G03920154Courtesy of FORD MOTOR CO.
  3. Install the spacer plate.
  4. Install the flexplate. For additional information, refer to FLEXPLATE .
scientia non olet · About LEMON Manuals