LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1151 (Front Drive Axle/Differential -- DANA 30) >> Diagnosis And Testing >> Front Drive Axle >> Checking Differential Ring Gear Backlash

Checking Differential Ring Gear Backlash

WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the differential housing cover.
  2. Using a suitable dial indicator and the special tool, measure and record the differential ring gear backlash in 4 opposing points on the ring gear.
    Fig 1: Measuring Differential Ring Gear Backlash
    G03912927Courtesy of FORD MOTOR CO.