LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (HVAC System - Heating & Ventilation) >> Removal & Installation >> Temperature Blend Door Control Cable >> Removal

Temperature Blend Door Control Cable: Removal

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Remove instrument panel center finish panel. See INSTRUMENT PANEL CENTER FINISH PANEL . Disconnect electrical connectors. Depress 3 tabs and remove temperature blend door control cable. See Figure.

scientia non olet · About LEMON Manuals