LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1119 (Seat System) >> Removal And Installation >> Seat Backrest - Second Row, 40 Percent, Freestyle >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the backrest folded down, release the backrest trim cover lower J-clip.
  2. Release the 2 backrest trim cover inside J-clips from the hard back panel.
  3. With the seat in the E-Z entry position, pull and remove the outboard pivot cover.
  4. Remove the pivot bolt.
    • To install, tighten to 23 Nm (17 lb-ft).
  5. Roll the trim cover up and remove the 2 recliner-to-backrest frame bolts. Remove the backrest.
    • To install, tighten to 50 Nm (37 lb-ft).
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals