LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1111 (Exterior Trim And Ornamentation) >> Removal And Installation >> Quarter Panel Moulding >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear door.
  2. Release the rear quarter trim panel moulding retaining clips.
    • Starting at the front lower portion of the rear quarter trim panel, moving rearward along the rear quarter trim panel.
      Fig 1: Removing/Installing Rear Quarter Trim Panel Moulding Retaining Clips
      G03988626Courtesy of FORD MOTOR CO.
  3. Remove the rear quarter trim panel moulding.
  4. To install, reverse the removal procedure.
    • It is necessary to install new rear quarter trim panel moulding retaining clips anytime the rear quarter trim panel moulding is removed.
scientia non olet · About LEMON Manuals