LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Air Bag Restraint Systems) >> Diagnostics >> Retrieving Diagnostic Trouble Codes (DTCS)

Retrieving Diagnostic Trouble Codes (DTCS)

WARNING: This page is about a different car, the 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect scan tool to Data Link Connector (DLC), located under instrument panel. Turn ignition switch to RUN position. Follow manufacturer's instructions for scan tool being used.
  2. After pressing START, all continuous DTCs will be displayed on scan tool screen. Record DTCs displayed for reference. See DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION  table. When historical DTCs are cleared, they cannot be retrieved.
scientia non olet · About LEMON Manuals