LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Air Bag Restraint Systems) >> Removal & Installation >> Side Crash Sensor >> Removal

Side Crash Sensor: Removal

WARNING: This page is about a different car, the 2002 Lincoln Navigator and 2002 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Pull carpet flap out from under outboard side of front seat to expose side crash sensor. Remove pin-type wire harness retainer from crash sensor. Remove side crash sensor mounting bolts and pull sensor out from under seat. Disconnect electrical connector and remove side crash sensor and bracket from vehicle.