Removal & Installation (3.8L)
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2000 Mercury Villager, 2000 Mercury Mountaineer, 2000 Lincoln Navigator, 2000 Ford Windstar, and 2000 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
Use the special tool with a twisting motion to pull the spark plug wire off the spark plugs. Use compressed air to remove any foreign materials from the spark plug well before removing the spark plugs. Remove the spark plug. To install, reverse removal procedure. Tighten to specification. See TORQUE SPECIFICATIONS .