LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Removal, Overhaul & Installation - Gasoline) >> Fuel System >> Upper Intake Manifold >> Removal (2.5L)

Removal (2.5L)

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2000 Mercury Villager, 2000 Mercury Mountaineer, 2000 Lincoln Navigator, 2000 Ford Windstar, and 2000 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Disconnect air temperature sensor. Remove air cleaner outlet tube. Remove splash shield and disconnect accelerator and cruise control cables. Disconnect harness connectors, vacuum hoses and vapor hose from throttle body.
  2. Disconnect vacuum hoses from manifold vacuum tree. Disconnect and plug coolant hose from intake manifold. Remove EGR tube and EGR valve. Remove vapor tube. Evenly loosen 7 bolts and remove upper intake manifold.
scientia non olet · About LEMON Manuals