Removal (2.5L)
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2000 Mercury Villager, 2000 Mercury Mountaineer, 2000 Lincoln Navigator, 2000 Ford Windstar, and 2000 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Remove upper intake manifold and throttle body assembly. See UPPER INTAKE MANIFOLD .
- Disconnect fuel supply and return lines. Disconnect wiring harness from injectors. Remove fuel supply manifold bolts. Carefully disengage manifold and fuel injectors from engine. Remove manifold and injectors. Remove injectors from fuel rail by using a rocking motion. See Figure.