LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Supplemental Inflatable Restraint System) >> Diagnostic Tests >> Test L: Driver Air Bag Resistance High (DTC B1932) >> Description

Test L: Driver Air Bag Resistance High (DTC B1932): Description

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Restraints Control Module (RCM) monitors resistance of driver-side air bag ignitor by measuring resistance between RCM harness connector C2041A, terminals No. 3 (Gray/Orange wire, circuit No. 614) and No. 4 (Gray/White wire, circuit No. 614). If RCM detects high resistance between these terminals, it will store Diagnostic Trouble Code (DTC) B1932 in memory and flash Code 32 on AIR BAG warning light.

scientia non olet · About LEMON Manuals