LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1054 (Safety Belt System -- F150 Pickup) >> Description And Operation >> Safety Belt System >> Belt Minder

Belt Minder

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The Belt Minder feature is a supplemental warning to the safety belt warning function. This feature provides an additional reminder to the driver that the driver and/or passenger safety belt is unbuckled by intermittently sounding a chime and illuminating the safety belt warning lamp in the instrument cluster.

The passenger Belt Minder feature is activated only when the occupant classification sensor (OCS) system detects a passenger in the right front seat and the passenger weight exceeds a programmed limit.

To activate or deactivate the Belt Minder feature, REFER to WARNING DEVICES .

BELT MINDER FEATURE REFERENCE CHART

If... Then...
The driver and/or passenger safety belt is not buckled before the vehicle has reached at least 5 km/h (3 mph) and 1-2 minutes have elapsed since the ignition switch has been turn to ON... The Belt Minder feature is activated - the safety belt warning light illuminates and the warning chime sounds for 6 seconds every 30 seconds, repeating for approximately 5 minutes or until the safety belt is buckled.
The driver and/or passenger safety belt is buckled while the safety belt indicator light is illuminated and the safety belt warning chime is sounding... The Belt Minder feature will not activate.
The driver and/or passenger safety belt is buckled before the ignition switch is turned to the ON position... The Belt Minder feature will not activate.