All adjustments

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Remove the upper rear door striker cover.

Fig 1: Removing Upper Rear Door Striker Cover
Courtesy of FORD MOTOR CO.
Remove the upper rear door striker.

Fig 2: Removing Upper Rear Door Striker
Courtesy of FORD MOTOR CO.
Remove the lower rear door striker.

Fig 3: Removing Lower Rear Door Striker
Courtesy of FORD MOTOR CO.

Horizontal and vertical adjustments
Loosen the rear door hinge-to-rear door bolts.

Fig 4: Loosening Rear Door Hinge-To-Rear Door Bolts
Courtesy of FORD MOTOR CO.
Adjust the rear door.
Tighten the rear door hinge-to-rear door bolts to 30 Nm (22 lb-ft).
Fore and aft adjustment
Remove the corner trim panel. For additional information, REFER to INTERIOR TRIM AND ORNAMENTATION .
Loosen the rear door hinge-to-body nuts.

Fig 5: Loosening Rear Door Hinge-To-Body Nuts
Courtesy of FORD MOTOR CO.
Adjust the door.
Tighten the rear door hinge-to-body nuts to 30 Nm (22 lb-ft).
Install the corner trim panel. For additional information, REFER to INTERIOR TRIM AND ORNAMENTATION .
All adjustments
Install the lower rear door striker.
- Tighten to 25 Nm (18 lb-ft).
Fig 6: Installing Lower Rear Door Striker
Courtesy of FORD MOTOR CO.
Install the upper rear door striker.
- Tighten to 25 Nm (18 lb-ft).
Fig 7: Installing Upper Rear Door Striker
Courtesy of FORD MOTOR CO.
Install the upper rear door striker cover.

Fig 8: Installing Upper Rear Door Striker Cover
Courtesy of FORD MOTOR CO.