LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1039 (HVAC System - Control Components -- F150 Pickup) >> Removal And Installation >> Blower Motor Speed Control >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The blower motor speed control can be accessed from below the RH side of the instrument panel.
  1. Disconnect the blower motor speed control electrical connector.
  2. Remove the blower motor speed control screw.
  3. Detach the blower motor speed control.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals