LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1038 (Seat System -- F150 Pickup) >> Removal And Installation >> Seat Cushion Cover - Front, 20 Percent >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 20 percent seat cushion. For additional information, refer to SEAT - FRONT, 20 PERCENT .
  2. Release the J-clips and remove the seat cushion pan.
    Fig 1: Removing Seat Cushion Pan
    G03966219Courtesy of FORD MOTOR CO.
  3. Remove the 6 hog rings (3 shown) and remove the 20 percent seat trim cover from the seat cushion foam pad.
    Fig 2: Removing Hog Rings And 20 Percent Seat Trim Cover From Seat Cushion Foam Pad
    G03966220Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals