Memory Seats
WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
This system allows automatic positioning of the driver seat to 2 programmable positions.
- A power driver seat position can be stored at any time. The driver must move the seat to the desired position using the driver seat switch assembly. The driver must then depress the memory SET switch which activates the memory SET switch light emitting diode (LED). Within 5 seconds (before the LED goes out), the driver must select a memory position. Memory 1 is selected by depressing memory switch 1. Memory 2 is selected by depressing memory switch 2.
- If no memory switch input is received within the 5-second time limit, the operation is aborted and the memory SET switch LED is turned off. This also occurs if one of the following inputs is received during the 5-second programming limit:
- Power driver seat switch
- Memory SET switch
- Power adjustable pedal switch
A position can only be recalled when the transmission selector is in PARK or NEUTRAL. A position may be programmed at any time.