General Specifications
WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Lubricants and Sealants | |
| Gasket Maker TA-16 | WSK-M2B348-A5 |
| Thread Sealant with PTFE TA-24 | WSK-M2G350-A2 |
| Threadlock and Sealer TA-25 | WSK-M2G351-A5 |
| Ultra Silicone Sealant TA-29 | - |
| Fluid | |
| MERCON® Multi-Purpose ATF Transmission Fluid XT-2-QDX | MERCON® |
| Capacity | 3.5 liters (3.1 qts) |
| Synchronizer | |
| Shift fork to synchronizer sleeve | 0.8 mm (0.03 in) |
| Synchronizer blocking ring to gear | 0.8 mm (0.031 in) |
| Endplay | |
| Third/4th clutch hub end play | 0.00-0.05 mm (0.00-0.0019 in) |
| Reverse idler gear end play | 0.1-0.2 mm (0.0039-0.0078 in) |
| Fifth/reverse hub end play | 0.00-0.05 mm (0.00-0.0019 in) |
| Countershaft reverse gear end play | 0.25-0.35 mm (0.0098-0.0138 in) |
| Output shaft maximum end play | 0.05-0.15 mm (0.0019-0.0059 in) |
| Countershaft end play | 0.15-0.25 mm (0.0059-0.0098 in) |
| Output shaft maximum runout | 0.05 mm (0.0019 in) |