LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1032 (Manual Transmission & Clutch - General Information -- F150 Pickup) >> General Procedures >> Flywheel Runout Check

Flywheel Runout Check

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL SPECIFICATIONS

G03901829
 Dial Indicator/Magnetic Base or 100-D002 (D78P-4201-B) equivalent
  1. Using the special tool, inspect the flywheel runout.
    • If the pilot bearing is worn or damaged, install a new pilot bearing.
    • Mount the special tool so that the indicator contact point rides on the clutch disc contact surface. Turn the flywheel.
    • If the runout exceeds the maximum allowance, install a new flywheel.
    Fig 1: Using Special Tool To Inspect Flywheel Runout
    G03964537Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals