LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1031 (Transfer Case -- F150 Pickup) >> Installation >> Transfer Case

Transfer Case

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new transfer case-to-transmission gasket.
    Fig 1: Installing New Transfer Case-To-Transmission Gasket
    G03934166Courtesy of FORD MOTOR CO.
  2. Fill the transfer case. For additional information, refer to TRANSFER CASE DRAINING AND FILLING . Refer to SPECIFICATIONS  for the correct type and quantity of fluid.
  3. Tighten the transfer case-to-transmission bolts to 47 Nm (35 lb-ft) evenly in a star pattern.
scientia non olet · About LEMON Manuals