LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Engine Controls - Removal, Overhaul & Installation - ECONOLINE - NGV) >> Ignition Systems >> Ignition Coils >> Removal & Installation (Coil-On-Plug)

Removal & Installation (Coil-On-Plug)

WARNING: This page is about a different car, the 2002 Ford Econoline and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect ignition coil harness connectors. Remove ignition coils. Remove spark plugs. To install, reverse removal procedure. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals