LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1020 (Engine Emission Control System -- F150 Pickup) >> Removal And Installation >> Exhaust Gas Recirculation (EGR) System Module - 4.2L >> Removal

Exhaust Gas Recirculation (EGR) System Module - 4.2L: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Disconnect the exhaust gas recirculation (EGR) system module vacuum connector.
  3. Disconnect the EGR system module electrical connector.
  4. Disconnect the exhaust manifold-to-EGR system module tube from the EGR system module.
  5. Remove the 2 bolts, the EGR system module and the gasket.
    • Discard the EGR system module gasket.
scientia non olet · About LEMON Manuals