LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1007 (Anti-Lock Brake System -- F150 Pickup) >> Diagnosis And Testing >> Anti-Lock Control >> Pinpoint Test A: No Communication With the Anti-lock Brake System (ABS) Module >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The operating voltage required to supply the ABS module, hydraulic pump, and isolation valves is between 10 and 17 volts.

Voltage is supplied to the ABS module through circuit 533 (TN/RD). Ground is provided through circuit 530 (LG/YE). The instrument cluster communicates interactively with the other electronic modules using the controller area network (CAN). For additional information about the communication network, refer to MODULE COMMUNICATIONS NETWORK .

scientia non olet · About LEMON Manuals