LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Injection Supply Manifold & Injectors >> Removal (4.6L DOHC - VIN V)

Removal (4.6L DOHC - VIN V)

  1. Ensure ignition switch is turned to OFF position. Remove engine cover and air inlet tube(s) as necessary. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect fuel supply line. See FUEL LINE CONNECTOR . Disconnect negative battery cable.
  2. On Mustang, remove upper intake manifold. See UPPER INTAKE MANIFOLD . On all models, disconnect 8 fuel injector electrical connectors and position aside. Disconnect electrical connector and vacuum hose at fuel pressure sensor. Remove 4 fuel injection supply manifold bolts. Remove fuel injection supply manifold and injectors as a unit. Remove fuel injectors and discard "O" rings.
scientia non olet · About LEMON Manuals