LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 2.0L Inline - VIN B & 3 >> Removal & Installation >> Thermostat >> Removal (Focus)

Removal (Focus)

  1. Drain the cooling system.
  2. Disconnect the coolant hoses.
    Fig 1: Disconnecting Coolant Hoses
    G01611782Courtesy of FORD MOTOR CO.
  3. Remove the thermostat cover bolts.
    Fig 2: Removing Thermostat Cover Bolts
    G01611783Courtesy of FORD MOTOR CO.
  4. Remove the thermostat.
    Fig 3: Removing Thermostat
    G01611784Courtesy of FORD MOTOR CO.
  5. Remove and discard the rubber seal.
    Fig 4: Removing And Discard Rubber Seal
    G01611785Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals