LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 2.0L Inline - VIN B & 3 >> Removal & Installation >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Disconnect negative battery cable. Drain cooling system. Remove intake manifold. See INTAKE MANIFOLD . Remove exhaust manifold. See EXHAUST MANIFOLD . Remove timing belt. See TIMING BELT . Remove camshafts and valve tappets. See CAMSHAFT .
  2. Remove cylinder head retaining bolts in sequence. See Fig 1.
Fig 1: Cylinder Head Bolt Loosening Sequence
G99D04349Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals