LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour LX, 2.5 L >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine - 4.6L V8 - VIN W & 6) >> Removal & Installation >> Oil Pan >> Removal (2WD Expedition & F150 Pickup)

Removal (2WD Expedition & F150 Pickup)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Ford Pickup, 2001 Ford Expedition, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Drain cooling system. Remove radiator air deflector. Remove air cleaner. Disconnect throttle cable and throttle position sensor electrical connector. Disconnect vacuum connections.
  2. Disconnect EGR valve. Remove throttle body adapter. Remove fan shroud. Raise and support vehicle. Drain engine oil. Remove engine mount through-bolts.
  3. Raise engine. Remove oil pan retaining bolts in reverse sequence. See Figure. Remove oil pan.