Crankshaft Rear Oil Seal: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Ford Pickup, 2001 Ford Expedition, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Clean and inspect all mating surface. Install rear seal retainer. See Fig 1. Using rear crankshaft seal replacer and rear crankshaft seal adapter, install rear seal. With rear crankshaft adapter still installed, use rear crankshaft slinger replacer and seal replacer to install seal slinger. To complete installation, reverse removal procedure. Tighten bolts to specifications. See TORQUE SPECIFICATIONS .