LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour LX, 2.5 L >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine - 4.6L V8 - VIN W & 6) >> Removal & Installation >> Camshaft Follower & Lash Adjuster >> Removal

Camshaft Follower & Lash Adjuster: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Ford Pickup, 2001 Ford Expedition, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove valve covers. See VALVE COVERS . Rotate crankshaft until piston in cylinder to be serviced is at bottom of its stroke, and camshaft lobe is at base circle.
  2. Install valve spring spacer between valve spring coils to prevent valve stem oil seal damage. Using valve spring compressor, compress valve spring. Remove camshaft follower and lash adjuster.
scientia non olet · About LEMON Manuals