LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour LX, 2.5 L >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine - 4.2L V6 - VIN 2) >> Overhaul >> Cylinder Head >> Cylinder Head

Cylinder Head

WARNING: This page is about a different car, the 2001 Ford Pickup, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean head gasket mating surface. Clean carbon from combustion chambers. DO NOT damage surfaces. Check cylinder head for cracks, burrs, nicks and warpage.
  2. DO NOT machine more than .010" (.25 mm) from original cylinder head surface to correct warpage. Replace cylinder head as necessary. See CYLINDER HEAD  table under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals