Trouble Shooting

CAUTION: Electronic modules are sensitive to static electrical charges. Proper grounding of technician and workpiece is essential to prevent damage.

Verify charging system, turn signals, headlights and cruise control are working properly. Inspect wiring harness for obvious signs of shorts, opens, bad connections or damage. Verify customer concern by operating system in question. Attempt to duplicate condition with ignition switch in RUN position with engine off, in START position before ignition switch is released and in RUN position with engine running. Visually inspect the following components.

Mechanical

Damaged Fuel Tank
Coolant Level
Engine Oil Level
Worn Or Damaged Accessory Drive Belt

Electrical

Blown Fuse(s)
Damaged Wiring Harness
Loose Or Corroded Connections
Damaged Switches, Sensors Or Modules
Damaged Instrument Cluster

If inspection reveals an obvious concern which can be easily serviced, repair as necessary. If inspection does not reveal an obvious concern which can be easily serviced, perform self-diagnostics. See SELF-DIAGNOSTIC SYSTEM .