LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1998 >> Ranger EV >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panels - Analog >> Symptom Testing >> Turn Indicator Inoperative >> Left Turn Indicator

Left Turn Indicator

  1. Turn ignition off. Remove instrument cluster. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. Disconnect instrument cluster connector C215. Place multifunction is left turn position. Measure voltage between ground and instrument cluster connector C215 terminal No. 5 (Light Green/White wire). See Figure . If voltage toggles between zero and more than 10 volts, go to next step. If voltage does not toggle between zero and more than 10 volts, repair open or short in Light Green/White wire between instrument cluster connector C215 and ground or voltage.
  2. Turn ignition off. Measure resistance between ground and instrument cluster connector C215 terminal No. 7 (Black wire). If resistance is less than 5 ohms, go to next step. If resistance is 5 ohms or more, repair open Black wire between instrument cluster connector C215 and ground.
  3. Check for continuity across left turn indicator bulb. If continuity exists, replace instrument cluster printed circuit. See PRINTED CIRCUIT  under REMOVAL & INSTALLATION. If continuity does not exist, replace bulb.
scientia non olet · About LEMON Manuals