LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1998 >> Econoline XLT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine - 7.3L (99F E Series & 99F F450/550) V8 Turbo Diesel - VIN F) >> Removal & Installation >> Valve Lifter >> Removal

Valve Lifter: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove appropriate cylinder head. See CYLINDER HEAD .
  2. Remove retaining bolt and camshaft follower guide. See Figure.
  3. Mark valve lifter location for installation reference. Remove valve lifter from cylinder block. If necessary to disassemble valve lifter, remove retainer and components from valve lifter body. See Figure.
scientia non olet · About LEMON Manuals