LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1998 >> Econoline XLT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine - 7.3L (99F E Series & 99F F450/550) V8 Turbo Diesel - VIN F) >> Removal & Installation >> Valve Lifter >> Installation

Valve Lifter: Installation

WARNING: This page is about a different variant/trim than selected.
  1. If assembling valve lifter, coat all components with engine oil and reassemble. To install, reverse removal procedure. Ensure valve lifter and valve lifter bore in cylinder block are coated with engine oil before installing. Install valve lifter into original location.
  2. Install cylinder head using proper procedure. See CYLINDER HEAD .
Fig 1: Locating Camshaft Follower Guide
G97B03787Courtesy of FORD MOTOR CO.
Fig 2: Exploded View Of Valve Lifter
G97D03788Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals